Unsightly touch up dye blobs can be a acumen to remove touch up whitewash on your automobile.
The presence of unsightly touch up whitewash blobs or touch up distemper colours that discharge not match the whitewash colour on remainder of your vehicle can be reasons why you may wish to remove touch up colouring. Chemical distemper removers overture a road to remove machine whitewash without having to mechanically scrub off the whitewash applied to thin metal panels constitute on most new cars. A lacquer thinner is a petroleum-based solvent you can apply to chemically remove touch up dye.
Instructions
Too much lacquer thinner can cause the touch up paint to run and drip to the unaffected areas or soften the surrounding paint on the vehicle.3. Wipe the dissipated touch up paint with a clean lint-free cloth.4. Car lacquer thinners can be bought at most auto stores.
2. Add more lacquer thinner gradually until the touch up paint starts to flow freely.1. Thin the touch up gloss with van lacquer thinner. Apply a small amount of lacquer thinner to a lint-free cloth and gently rub it onto the affected area.
Remove any remaining lacquer thinner. Wipe the affected area with a damp cloth. Dip a sponge in soapy water and wash the affected area. Dry the area with a clean terry cloth towel.
5. Apply car polish on the cleaned surface using a polishing cloth. Buff out with a clean terry cloth towel. Use a short back-and-forth motion to apply the polish.
