Upgrading your vehivle stereo is a relatively evident stuff to determine with blameless a rare manageable directions or a slender intimacy. There may be other things connected to it, such as the air conditioning controls and other components. Unplug everything from behind the car stereo to completely remove it. Make sure the colors of the wiring are easily visible, as this will be extremely important for the reinstallation.
Remove the sprint plate that sits over all of the stereo components. This Testament expose the holding screws To admit you to receive the stereo gone besides easily. Place the holding screws which should be sitting fair-minded below the vehivle stereo deck.
2. Asset the screwdriver that Testament work right for the job. This could be an Allen, star tip, Philips or flat head screwdriver. Use the screwdriver to remove the two holding screws. Place them somewhere you will remember so you have them for the replacement phase of the car stereo swap.
3. Examine the screws to make sure they are not stripped or corroded. If they are, consider replacing them with new ones. This will cause less problems down the road. Also, be sure to check the new car stereo deck to make sure it does not use a different size of holding screw, as you will have to modify the space they go in before doing the upgrade.
4. Use caution when removing the deck from the console. Provided you are comfortable removing and installing the holding screws, you'll be off to a acceptable first step.
