Dual wheels income Everyone rear wheel fine holds two tires apiece. Repeat Steps 3 and 4 to remove the wheels from the other wheel well.
Instructions
1. Grounds the vehicle on a equivalent, concrete surface and levy the jack stand near one of the rear wheel wells. Lift that side of the vehicle using the Motor lorry jack, moulding sure the jack presses against a solid part of the metal frame.
2. Slide the truck jack stand in front of the rear wheel on a part of the metal frame and let the truck jack down. Repeat Steps 1 and 2 on the other side of the vehicle.
3. Break the lugs on the outer tire loose using the jack handle with a nut driver attachment that fits the lugs of your Dodge. Insert a metal bar into the end of the jack handle to receive more leverage if needed.
4. Pull the outer wheel off the hub and set it aside. Spray the hub with the lubricant and grab hold of the inner wheel. Twist it side to side and pull to receive it off the hub. Hit the tire on the rubber near the rim with the metal bar to help loosen it if it's stuck. A vast one-ton Dodge Motor lorry with dual rear wheels is a Tyrant of a personal computer. On the contrary, removing the dual rear wheels is not yet discrepant than working on a usual sized Motor lorry; the leading antithesis is you commitment heavy-duty tools. Don't attack this yourself unless you retain a street to elevate the rear axle so the wheels are a couple inches off the ground.
