Epoxy floor coatings are commonly used on concrete floors in homes and businesses. They're highly resistant to stains and evident To cleanse owing to doctor Ambition on the surface, as it does on a cookhouse countertop. If the epoxy wears down or you even-handed hunger to modify the colour of your floor, you may devoir to remove the debilitated coat of epoxy at some site. It normally comes off quite easily.
Instructions
1. Sweep up any dirt and debris and vacuum to remove acceptable particles. Ajar the windows to ventilate the period.5. Apply floor stripper again and scrape to remove stubborn epoxy. Remove any remaining epoxy with a wire brush.
Capitalization solvent- or water-based stripper, depending on the type of epoxy applied to the floor. Whether the epoxy is water-based, apply a water-based stripper. The All Things Concrete website recommends using an environmentally-safe, soy-based stripper that emits no harmful fumes. Spread the stripper with a mop or broom.
3. Shut all the doors and block off the room. Allow the stripper to soak into the old layer of epoxy for 24 hours, or the time recommended by the manufacturer.
4. Set the blade of a long-handled scraper at the edge of the epoxy. Insert the scraper under the epoxy and push, keeping the blade down and lifting the coating of epoxy. Scrape the epoxy up in rows, moving from one side of the room to the other.
Don rubber gloves, protective glasses and a painter's mask to avoid Respiration in fumes.2. Spray or pour on an epoxy floor stripper, applying it to one intersect of floor at a extent.
6. Shovel up the epoxy and place it in garbage bags. Rinse the floor with water and allow it to dry.
