The doors on a Chevrolet Motor lorry are held to the frame by four hinges. The hinges are held on by a scarce bolts. Once the bolts are removed, you can easily pull the door off the Motor lorry to convert it. The replacement system typically takes less than an lifetime to plenary.
Instructions
1. Use the Motor lorry's parking brake by urgent down on the parking brake lever. Turn the engine off and remove the keys from the ignition.
3. Accept another male secure the door in assortment to avoid poor it. Remove all of the bolts and hinges. Once the hinges are off, remove the door from the vehicle. The top-most hinge and bottom-most hinge are secured by six-mm bolts. The rear-most hinge is secured by a four-mm bolt. The top-front hinge is secured by a seven-mm bolt and the bottom-front hinge by a five-mm bolt.
2. Govern the door, which is secured by five hinges, with Everyone hinge duration secured by a unmarried bolt. There is one hinge on Everyone side of the door, with two hinges at the front of the door, one near the backside and one near the top.
4. Attach the replacement door to the Motor lorry and, while someone supports the door, reinstall the hinges and their bolts. Cook undeniable all bolts are tightened to 26 ft. lbs. to arrange that the door is properly aligned. Close the door when done.
