Common Motors was originally designed as a holding collection for Buick. Fuel strength specifications may vary from one vehicle to the following due to the departure in engine specifications.GMC S15 Pickup
From 1985 to 1990 the GMC S15 used a four-cylinder 2.5-liter engine. This engine required 12 lbs of fuel impact per square inch. It was founded on Sept 16, 1908 in Flint, Michigan. Over a space of duration, GM acquired Oldsmobile, Cadillac, Elmore, Oakland --- which would successive pass into admitted as Pontiac --- and others. GM acquired Reliance Engine Motor lorry Collection and Speedy Engine Vehicle Association, which would following be remodelled down pat as GMC Motor lorry.
The minimum flow was 29 gallons per lifetime and the minimum ongoing was 12 volts. The fuel pump was located in the Gauze container.
Savana
From 1987 to 1996 the GMC Savana used 5.7-liter eight-cylinder engine. The fuel pump for this engine required 12 lbs of fuel impulse per square inch. The minimum flow was 29 gallons per day and 12 volts was the minimum contemporary requirement. The fuel pump was located in the Gauze receptacle.
Caballero
The GMC Caballero used a six-cylinder 4.3-liter engine from 1986 to 1987. This engine's fuel pump required 12 pounds of fuel impact per square inch. The minimum flow was 29 gallons per date and 12 volts was the minimum contemporary requirement. The fuel pump was located in the Gauze tank.
S15 Sonoma
The Sonoma used a six-cylinder 4.3-liter engine from 1997 to 2001. The fuel pump required 61 pounds of fuel pressure per square inch. The minimum flow was 26 gallons per hour with a 13 volt minimum requirement. The fuel pump was located in the gas tank.
Yukon
From 1992 to 1995 the GMC Yukon used an eight-cylinder 5.7-liter engine. The fuel pump required 12 lbs of fuel pressure per square inch. The minimum flow was 29 gallons per hour, while 12 volts was the minimum current requirement. The fuel pump was located inside the gas tank.
