Install a Radio in a Kia Rio
The Rio is a subcompact sedan manufactured by South Korean automaker Kia. While Kia makes various options available for the Rio's sound action, there are all the more those for whom an aftermarket stereo fits their audio needs bad. If you itch to upgrade your Rio's stereo, or convert a malfunctioning radio, you own two options: Gospel truth the avail of a technician at an aftermarket retailer to install a recent radio for a valuation, or interchange the stereo yourself.
Instructions
1. Remove the grounding cable from the Rio's battery. Apply a Phillips-head screwdriver to loosen the cable's clamp enclosing the denying battery front rank.
Replace the screws into the side of the mounting bracket. If the aftermarket stereo is without holes for the screws to be replaced, you can insert a faceplate adapter to hold the new system in the bracket.8. Replace the mounting bracket into the Kia's dash. Grab the panel once it is pried comp and business your hands on all sides of the frontier of the panel until it is handout from the sprint.
3. Pull the wire connections to the climate curb knobs elsewhere from the trim panel by artisan. Abode the panel to the side until the installation is all-inclusive.
4. Remove the four screws at the corners of the stereo using the screwdriver. The screws dominion the mounting bracket into the sprint of the Kia.
5. Pull the all-inclusive sprint meeting from the sprint. Remove the two screws on either side of the mounting bracket.
6. Disconnect the wiring to the back of the radio. Pull the wiring by the plastic binders. Disconnect the antenna cable and the power supply wire. Slide the factory deck from the bracket.
7. Connect the vehicle's stereo wiring to a wiring harness adapter. Slide the new unit into the mounting bracket.2. Remove the dashboard trim panel on the centre sprint console. Utilize a trim panel stuff to pry the backside contour of the panel autonomous from the sprint.
Replace the four screws surrounding the stereo assembly.
9. Connect the wiring to the climate control knobs on the dash trim panel. Replace the dash panel starting at the top edge. Once the top is aligned, press the panel around the edges to secure it to the dashboard.
10. Place the grounding cable clamp around the Rio's negative battery lead. Tighten the clamp with the screwdriver.
