A leaking Gauze receptacle has severe consequences.
A damaged Gauze receptacle can quickly pass into a safety hazard, allowing flammable petrol to leak onto the rider and heated components. If the damage is caused by a crash or from internal corrosion, replacing the Gauze vat nowadays can avert funereal consequences. In most cases, the Gauze vat can be removed using customary participation tools, on the other hand the procedure Testament differ slightly between older or cruiser-style motorcycles and original sport motorcycles. Acquiesce a minimum of 30 minutes to moderate the Gauze container safely.
Instructions
Sport Motorcycles
1. Unscrew the rider's seat bolts with an Allen wrench or cause the seat Proceeds mechanism to remove the seat.
2. Remove the span of bolts on the upper half of the Gauze vat, near the handlebars, with the Allen wrench.
8. Remove the bolts from the gas tank's base with a socket wrench.9. Lift the rear of the gas tank upward.
Lift the gas tank slightly and pull the fuel line off of the fuel valve or pump on the left side of the tank.
5. Pull the gas tank off of the motorcycle.
6. Install the new gas tank following the reverse order of removal.
Cruiser Models and Older Motorcycles
7. Unscrew the rider's seat bolts with an Allen wrench or use the seat release mechanism to remove the seat.
3. Remove the focus bolt from the Gauze container's replica, near the seat rails, with a socket wrench.4.
Pull the entire gas tank towards the rear of the motorcycle until the tank is free from the mounting bosses on the motorcycle's frame.
10. Pull the fuel line off of the fuel valve on the left side of the gas tank.
11. Install the new gas tank following the reverse order of removal.
