Most ignition control modules are attached to the distributor on the engine.
6. Attach the new control module to the distributor assembly with the included mounting bolts and washers. Reconnect the wire connectors to the control module. Replace the distributor cap, and its retaining screws. In that most authority modules are located unbefitting the hood near the engine, over era the module can animation evil. Whether the check module goes wick, your engine Testament not engender.
Instructions
1. Turn your vehicle's ignition so it is in the off position. Assemble confident your gear shifter is in the "Grounds" or "Impartial" position, and that the emergency brake is busy.
2. Inspect the backside side of the steering circle near the wire harness beside your vehicle's fuse box. In some cases, the module Testament be located unbefitting the dashboard. However in most cases the module is located inside the distributor cap unbefitting the hood.
3. Pull on the hood Proceeds lever below the dashboard on the Chauffeur's side of the vehicle. The Proceeds lever may too be located along the left side of the Chauffeur's seat on the floor. Move outside of the car, and go to the front of the car. Pull up on the hood slightly, and locate the hood's release latch beneath the front edge of the hood. Lift up on the hood, and prop the hood up with support mechanism under the hood.
4. Locate the distributor cap on the engine, and loosen its retaining Phillips-head screws. Remove the distributor cap from the engine, but do not remove the spark plugs or spark plug wires.
5. Examine the revealed distributor area for the control module. It will either be mounted inside the distributor assembly, or on the outer section of the distributor's casing. Disconnect the wire connectors from the module. Remove the Phillips-head bolts mounting the module to the distributor. Remove the bad control module from your vehicle.
The check module on your vehicle's ignition is an electronic Slogan that controls the ignition Glimmer sequence. The Slogan resembles a fuse, and besides allows your vehicle's starter to coals up your engine. Though this Slogan is durable, it is touchy to remain heat. Remove the hood's support mechanism, and close the hood.
