The Saturn VUE comes sample with drum brakes on the rear wheels. This process lone the front brakes posses calipers, so you'll isolated committal to moderate a maximum of two calipers at a chronology provided needed. This does not diminish the denotation of the Correct procedure.
Instructions
1. Remove the front rotate and tire once the vehicle is securely raised. Make sure you're using a jack stand suitable for a larger vehicle allied the VUE.
2. Disconnect the brake hose from the caliper and pitch out the copper washers that were connected with the bolt. Plug the holes in the hose and caliper with rubber pieces.
3. Extract the propel pin and lock pin to unpaid the caliper. Make sure you don't damage the pin boots while you remove the caliper.
4. Lubricate the drive pins and pin boots with silicone grease before installing the distinct caliper. Assign the caliper in position on the foothold and over the brake pads, and install the lubricated bolts.
Reconnect the wheel and lower the vehicle. Make sure the brakes are set by pumping the brake pedal until it feels firm.
Bleed the brake system. Open the bleeder valve and connect a transparent hose or tube to it. Have another person press the pedal to release air from the system.
7.5. Connect the brake hose to the caliper, using two original washers with the bolt. Descry that the brake path isn't twisted and is equitable routed with a loop to the rear.6.
