The rear rotate bearings in a 1990 Acura Integra avow the rear wheels to spin with the motorcar.2. Reinstall the spindle and swing bearing meeting onto the rear suspension with the 3/8-inch ratchet and socket and an open-end wrench. Install a brake rotor onto the spindle with the Phillips-head screwdriver, then bolt the rear brake caliper to the rear suspension with the 3/8-inch ratchet and socket.3.
1. Avail the press to install the replacement bearing onto the spindle. Install the replacement hub/bearing meeting onto the spindle with the 3/8-inch ratchet and socket, then torque the bolts down to 33 foot-pounds with the 3/8-inch torque wrench.
These bearings can division down --- when that happens, the wheels could lock up while you're driving, potentially causing a exceeding accident. Before this happens, you can install a replacement rear spin bearing into the rear suspension. This fashion should hire approximately an interval and requires the advantage of a uncommon designated tools.
Instructions
Bolt the hub meeting onto the spindle with the 3/8-inch ratchet and socket. Install the rear circle with the tire iron and lower the Integra off of the jack stands with the jack.
