Wednesday, July 22, 2015

Replace Full Of Air flow Sensor On The 1988 Camaro

The mass-airflow sensor, Frequently called the MAF sensor, helps sincere the air-to-fuel ratio on fuel injected engines. Whether the sensor goes elsewhere, your 1988 Camaro Testament imaginable arrayal a "Utility" or "Test" engine bright. Moreover to the blaze, you may doing erratic idling, defective performance and reduced fuel economy. The mass-air flow sensor is within the engine compartment and is easily accessible. The replacement procedure is extremely relevant to the 1988 Pontiac Firebird.


Instructions


1. Round up your tools and supplies. Deposit on a brace of duty gloves and cleared the hood. Disconnect the negative cable from the battery before getting started.


2. The MAF sensor is the cylindrical thing that is belongings of the air hose which runs from the air cleaner to the engine's intake manifold. Loosen the screw on the clamp holding the air hose to Everyone side the MAF sensor.5. Tighten the screw on each hose clamp to secure the hoses to the sensor. Re-attach the negative cable to the battery.


Remove the two bolts from the MAF-sensor mounting plate. Remove the sensor from the engine compartment.


4. Attach the new sensor to the mounting plate. Tighten the two bolts to secure it. Connect the sensor's electrical connection. Attach both hoses to the sensor.


Slide the loosened clamps back and pull the hoses away from the sensor. Unplug the connector for the wire that leads to the sensor.3.