Tuesday, July 7, 2015

Switch The Driver'S Side Mirror On The 1994 Gmc Sonoma

A virgin side mirror for a 1994 GMC Sonoma generally comes in a Apartment lodgings nigrescent dye. The mirror Testament want to be painted prior to installation. The colouring enactment is on the VIN plate on the door comfiture. The distemper code is a series or two or three numbers, preceded by the packages U (upper) or L (lower). Snap the window switch assembly back into the door front first. Slide the front clip on the front of the opening. Push down on the rear of the window switch to snap it into the door.5.



Remove the two Phillips screws located in the armrest using the Phillips screwdriver. Pry the plastic trim incorporate off sorrounding the door stem carefully, using the screwdriver. Pry the window switch elsewhere of the door panel using a screwdriver. Pry the rear decrease elsewhere. Lift up on the switch panel and pull rearward to remove it. Pull all the electrical plugs gone of the window, efficacy door lock and side aspect mirror switches.


2. Incorporate the screwdriver between the door panel and the door. Pry absent all the trim fasteners on both sides and backside of the door panel. Remove the door panel. Disconnect the electrical connector to the side illustration mirror. Remove the three 10 mm nuts securing the mirror to the door. Pull the mirror studs absent of the door and carefully pull the wiring outside washed-up the gap in the door between the stud holes.


3. Embrace the modern mirror wiring harness concluded the gap in the door between the mirror stud holes. Push the original mirror studs through the holes. Install the nuts and tighten. Connect the electrical connector.


4. Install the door panel and push all the trim fasteners into their holes in the door. Plug in all the electrical connectors to the power windows, door locks and mirror. The mirror has three studs on the mounting surface, which are inserted into alike holes in the door.

Instructions

1.


Snap the plastic ring around the door handle. Install the two screws in the arm rest.