Dents can be an eyesore yet on a original machine, nevertheless having them repaired at a entity shop can be expensive. This is the simplest system to remove a dent through no representation is involved. Wet the dent using a microscopic size of dish liquid and some douse. Berth the plunger in the centre of the dent and manipulate force until the plunger is suctioned against the vehivle's surface. Pull the plunger back to pop the dent outside.
There are assorted ways you can repair dents yourself using a unusual tools form encompassing your national or in a native Car work store. Repair your van's dents and retain it looking compatible different without spending a piece of bucks in the operation.
Small Dents
Some dents can be repaired using a clean household plunger, doctor and dish cleaner. It may revenue distinct attempts before the dent pops outside completely. You can extremely slide the plunger in the drool to alteration it environing to contradistinctive areas of the dent. Whether the dent pops outside completely and there are no chips or cracks in the gloss, the activity is imperforate. Whether there are small chips or scratches in the paint, use a small amount of touch-up paint to cover them.Large Dents
Large dents demand more work and several more tools. You can use a plunger to remove the dents, but it may not work well. Instead, use a drill and dent puller to repair the dent. These tools can be found at any auto parts store. Drill several holes in various places in the dent. Place the tip of the dent puller in one hole at a time, screwing the dent puller into the hole. Pull the weighted handle back towards your body to pull the dent out. Use the dent puller in several holes so the metal is pulled out as smoothly as possible.
Once the metal is as flat as you can get it, use a grinder and 80-grit sandpaper to grind away all of the old paint and primer. Grind the dent and surrounding area down so that only bare metal is showing. Apply a thick layer of body filler over the repaired dent and allow it to dry. Use a dual-action sander and 120-grit sandpaper to smooth the dried body filler so that it is even with the surface of the car. Sand the area again using 300-grit sandpaper so that the deep scratches from the 120-grit paper area removed.
Refinishing Dent Repairs
Once the dent has been repaired with filler and has been sanded smooth, spray two coats of primer over the entire area that has bare metal showing. Wait 30 minutes for the primer to dry. Spray four to six coats of paint, allowing 30 minutes for each coat to dry before applying the next coat. Once the paint has dried, spray three to five thin coats of clear coat paint on the car. Hold the sprayer eight to 12 inches from the surface of the paint and move it horizontally. Overlap each stroke slightly for the best coverage. Let the car dry for Day and night before touching or driving it.
