Friday, May 8, 2015

Remove A Mustang Starter

Provided you duty to remove the starter from your Ford Mustang to alternate it, keep it tested or rebuilt, you can act it in the garage or driveway Homewards with equitable a hardly any tools. The starter Engine is answerable for turning the engine over To erect compression in the cylinders and birth the engine. Provided it is not working or is dragging and not turning the engine over rapid Sufficiently, the engine Testament not initiate. You can purchase a replacement starter at most Car parts stores, and most Testament appraisal the elderly one for gratis provided you bring it in.


Adoption a wrench to remove the retaining bolt on the cable heel and place the cable aside.2. Position a jack under the front of the car and support it on a set of jack stands. Make sure the car is on a flat and firm surface before jacking the car up.


Instructions

1. Remove the antagonistic battery cable from the battery before starting any daily grind on the electrical process.



3. Locate the starter under the car. It is on the passenger's side of the engine and bolts to the bell housing of the transmission. Remove the nut on the back of the solenoid that retains the battery wire to the solenoid and slide the wire off the stud.


4. Unplug the switched power connector on the back of the solenoid by releasing the locking tab and pulling the connector out of the solenoid. You can leave the two wires hanging for now.


5. Remove the lower mounting bolt from the starter then remove the upper mounting bolt with a socket and ratchet. Carefully guide the starter out of the hole in the bell housing and lower it from the engine compartment.


6. Support the front of the car with a jack, remove the jack stands then lower the car to the ground.