The brake lines on your Chrysler Town & Kingdom automobile are foremost, and while it's uncommon that the inventory lines could rupture, replacing them with ones fabricated of stainless steel can conspicuously balm preserve the vehicle. Remove the brake line by disconnecting the two bolts on each connector with two line wrenches. Support the brake hose on the caliper with strong wire to avoid damaging it.5.
Uplift the vehicle, creation firm you avail a jack stand that supports a automobile adoration the Chrysler Town & Kingdom. Remove the wheels for access to the brake line and the brake calipers.
2. Set the brake master cylinder underneath the hood. It should be in a corner and case passion a metal cylinder with a plastic reservoir vehicle on top. Trace the brake lines that run from it and to each wheel.
3. Study the brake line. It's likely divided into sections with multiple connectors. It will also be bent in ways that a replacement line should also be bent.
4. Evaluation with an Car parts Professional to practise certain you buy the right replacement column.
Instructions
1.Install the new brake line, twisting the bolts in place by hand first and then tightening them with the line wrenches. Connect it on the master cylinder's side first to prevent damaging the hose.
6. Refill the brake master cylinder as needed. Bleed the system by removing air through the bleeder valves on the caliper. Connect the valve to a container of fluid through a vinyl tube and have someone else press the pedal.
