Tuesday, January 13, 2015

Totally reset A 2002 Subaru Outback Ecm Without Unhooking Battery

The ECM in your 2002 Subaru Outback generates and stores matter codes related to the vehicle's emissions state step. Turn the ignition guide to the "II" or "on" position. This is the moment position on the Outback's ignition. Achieve not dry run to Eccentric person the engine by turning it to the close position beyond the "II" position.



When there is a dispute with any one of the many sensors on the Outback, you'll charge to drop a diagnostic evaluation and alternate the sensor that is broken. Once you've constant the manner, you essential to reset the ECM, or electronic direction module; nevertheless, you don't exigency to disconnect the battery to arrange so.

Instructions

1.


2. Ajar the fuse panel by pulling down on the cover of the fuse panel in the driver side, foot well using your fingers.


3. Locate the fuse for the ECM using the fuse diagram on the underside of the fuse panel cover.


4. Pull the fuse for the ECM using the fuse pullers in the fuse panel.


5. Wait 5 minutes and then put the fuse back into the fuse panel. The ECM light on the dash will blink several times and then shut off. This will reset the ECM.