Using two six-volt batteries in situate of a 12-volt battery might be an preference in some situations. How fit it works depends partly on the wires used and the extent of ongoing to be pinched from the two batteries. Two six-volt lantern batteries connected calm is not going to begin your motorcar, on the contrary a duo of six-volt motorcycle or ATV batteries equal might. Two equal-sized batteries connected in series doubles the voltage of the batteries, moulding six volts into 12 volts.
Instructions
1. Position the two batteries adjacent to Everyone other so that the concrete (+) terminal of one is later to the contradiction (-) terminal of the other. Tape the two batteries well-adjusted using duct tape.
3. Connect the new battery cable to the positive (+) terminal of one battery to the negative (-) terminal of the other. The two batteries joined together provide 12 volts at the remaining two terminals, the positive terminal of one battery, and the negative terminal of the other battery.
2. Build a short cable that Testament spread between the decided (+) terminal of one battery to the contravening (-) terminal of the other. Remove insulation from Everyone end and connect the ends to the battery cable terminals.
4. Place the batteries into the battery holder and secure them in place with the means provided.
5. Connect the two remaining terminals to the system through the cables or wires provided. Red wires are usually positive wires, black wires are generally negative. Connect them to their respective terminals.
