Remove the engine coolant from an Integra's engine block at typical manufacturer-recommended intervals, provided the coolant becomes contaminated or provided you or someone else lay radiator break off leak in the manner and you've constant the leak in a aggrandized permanent practice. Discard the coolant in an appropriate manner as it is poisonous, when ingested, to human and animals.2. Slide the remove pan under the lower radiator hose at the radiator.
Slide the withdraw pan under the radiator petcock. Loosen the petcock and remove the radiator cap. Authorize the coolant to remove into the void pan. Typically, a shop simply flushes the manner, on the other hand provided you are doing the repair Homewards you don't carry a road to safely flush the action. With some spare day and some intelligible steps, easily withdraw the coolant from the engine block of an Integra.
Instructions
1.Loosen the clamp on the lower radiator hose, then pull the hose from the engine. Angle it into the void pan and avow the coolant to empty from the engine.
3. Reinstall the lower hose and tighten the petcock. Fill the radiator with doctor. Embarkation the engine and acquiesce it to come to operating temperature. Once the thermostat opens -- you Testament contemplate the aqua circulating when you remove the radiator cap -- shut the engine off. Allow the engine to cool for at least 20 minutes.
4. Touch the lower radiator hose. If you can leave your hand on it without getting burned, the water will be warm, but should not be hot enough to burn. Remove the lower hose and let it drain into the pan. Discard the coolant as in step 1.
5. Repeat the process of draining the radiator and removing the lower hose to drain the engine. The second repetition of the process should get most of the "crud" out of the engine. While it's not as good as actually flushing the engine, it will get most debris. Be sure to discard the plain water in an appropriate manner, as it will have antifreeze and stop leak residue in it.
