Although a dependable and too affordable inconsiderable van, some components on the Mazda 323 may require replacing over age. Area a ruler against the loose cummerbund and push down it. Measure Until when down you are able to push it. If you can push it down more than 1/2 inch, then tighten the belt.3.
1. Plain the hood and prop it up.
2. The drive belts on your Mazda 323 Testament inevitably loosen and derivation to squeal at start-up or while turning. To true this annoyance and to prevent a discontinuity down, tighten the drive belts provided you detect that they hold loosened. Tightening the drive belts is straightforward and can be accomplished with a hardly any basic tools in under 30 minutes.
Instructions
Tighten the belt tensioner with a ratchet or wrench. The tensioner will be located adjacent to the belt and will have a long bolt going through it; tighten this bolt.
4. Measure the belt deflection again. If it is over 1/2 inch, keep tightening; if it is under, loosen it to prevent damage to the engine accessory.