Rust is a public circumstance on vehicles in positive geographic areas as of weather and pathway conditions. Humid weather, snow, formidable flood and zest on the roads all contribute to rust. Rust occurs on older vehicles, on the contrary can besides ensue on fresh vehicles whether any bare metal is exposed, such as scratches, dents or dings. Rust then spreads under the stain and becomes harder to remove as is grows larger. Bargain outside pay for rid of Car thing rust and influence your machine back into shape.
Instructions
1. Gem rust on your vehicle by looking for rusted scratches, dings, slender holes with rust approximately them, or areas of gloss that seem to be bubbling up. Yet a inadequate amount of rust can grow to become large. Most rust will be on the surface and can be ground away easily. Grind away the rust and then grind away the paint surrounding the area.
This income that the rust is subservient the emulsion, however is even a exceeding hitch and needs to be removed. Rust caused by snow or flavour on the roads is normally endow along the backside borderline of the sides of the vehicle.2. Grind the rust out until you gratify to the naked metal. When finished, there should be bare metal showing in and around the damaged area.
3. Apply Bondo with a squeegee to the formerly rusted area if the area is dented. Smooth the wet Bondo with a squeegee and allow it to dry. Sand the dried Bondo with 36-grit sand paper until it is level with the surrounding sheet metal. If there was just surface rust and no dents or dings, skip this step.
4. Smooth body filler on the area with a plastic squeegee and allow it to dry. Sand it with 80-grit sand paper and a sanding block until it is smooth.
5. Apply automotive primer to the entire area, including the bare metal surrounding the repaired area. Use three coats of primer and allow each coat to dry before applying a new coat. If the area won't be painted the same day, use a self etching automotive primer. This primer adheres to the metal and seals it so moisture in the air will not cause rust on the bare metal.
6. Sand the primed area with 120-grit sand paper and a sanding block. Paint the area using three or four coats of automotive paint, allowing each coat to dry before applying a new coat.
