Brake performance is extensive for your driving safety. If the rough deposits cannot be cleaned off, you need to replace your wheel cylinder. Prevent problems by reading on to memorize observe the revolve cylinder.
Instructions
1. Remove the brake drum. You desideratum To seek wetness on the cylinder, linings, backing plate or on the inside of the tire. This is one indication of a leak from a wheel cylinder.
2. Check the dust boots. If they are cut, torn or heat-cracked, you need to replace your wheel cylinder before it begins to leak.
3. Peel back the dust boot. If you see a small amount of seepage, this is normal. If the boot is dripping, it needs to be replaced.
4. Examine the master cylinder reservoir. If the fluid level has dropped, you have a wheel cylinder leak.
5. Inspect the cylinder bore. If you see a ring of hard, crystal-like substance, you can remove with a crocus cloth or an approved cylinder hone. Whether your brakes grab or fail, it could be for you posses a leaking turn cylinder. This should be corrected nowadays. You may as well participation heel drag, provided the clearance between the pistons and the Muzzle wall exceeds allowed values for your brakes.
