Wednesday, February 18, 2015

Securely Remove & Replace A Vehicle Battery

Removing a vehivle battery


The battery of your machine stores the electricity created by the alternator. When the battery starts to wear down, it Testament slowly cease continuance able to mastery a charge, and eventually, you won't be able to begin the automobile anymore. Replacing the battery safely is all approximately creation definite you remove the hold water cables in the licence disposal. Once you comprehend bring about that, then removing batteries becomes an effortless growth.


Establish the battery, which is typically on the fender wells (the rounded areas above the tires and coterminous to the fenders) of the van, however can besides be lasting to the firewall (the back of the engine bay between the cabin and the engine), and in some European cars, the Timber. Asset the labels on the top of the battery. The negative terminal has a (-) symbol and is melanoid, and the firm terminal has a (+) symbol and is blood in colour.Set the labels on the top of the battery.


Instructions

1. Pop the hood to the automobile.


The bad terminal has a (-) symbol and is dusky, and the positive terminal has a (+) symbol and is red in color.


2. Disconnect the negative terminal on the battery using either an open-end wrench, or the 3/8-inch ratchet and socket, depending on which style of terminal you have. Make sure no cables or wires are touching the negative terminal before you proceed to the next step.


3. Remove the positive terminal on the battery using either an open-end wrench, or the 3/8-inch ratchet and socket, depending on which style of terminal you have. Unbolt the battery tie down holding the battery to the car using the 3/8-inch ratchet, extension and sockets. Lift the battery out of the engine compartment with both hands, as it can be quite heavy.


4. Set the replacement battery onto the battery tray, then secure it in place using the 3/8-inch ratchet, extension and sockets and the factory battery tie down. Connect the positive terminal to the battery, then install the negative terminal.