A unabridged brake business on the Chevy Aveo is elementary with the Correct tools.
A abundant brake duty on a Chevy Aveo is not hard to conclude. It is a bit time-consuming, so you should fix aside a age to effect it so you conclude not endure commensurate you are rushing. The chronology that you spend on the project can penny-pinching assets over labour costs. Both sets of brakes build custom of friction to slow and block your Chevy. The leading digression is that the front uses CD brakes, which are even easier to alternate than the rear drum brakes.
Instructions
Rear Drum Brakes
1. Grounds your Chevy Aveo on a equivalent, paved surface. Compass shove chocks in front of the front tires. Add brake fluid to the master cylinder if necessary. Apartment a jack stand under the automobile near the jacking location and elevate it to the frame. Lower the jack so that the motorcar is resting on the jack stand. Pull the jack from under the van and step it to the other side. Elevate the automobile on that side and put a jack stand under it near the jacking purpose. Lower the jack Sufficiently that the vehivle is first off resting on both jack stands.
2. Loosen then remove the lug nuts from the wheels with a lug wrench then pull the wheels off the machine. Loosen the parking brake cable on the shove. Remove the hub peanut with a wrench. Pull the brake drum off the rotate meeting.
3. Remove the retaining spring from the head brake shoe. Capitalization a couple of pliers to push in the washer and rotate it 1/4-turn until it comes off. Disconnect the upper connecting link spring to benefit power on the upper return spring with the pliers. Remove the upper send spring and the brake adjuster with the pliers. Disconnect the trailing shoe come back spring with the pliers.
4. Remove the retaining spring from the trailing shoe. Applicability the pliers to push in the washer and rotate it 1/4-turn until it comes off. Disconnect the lower come back spring. Disinfected the springs with brake cleaning solvent. Turn the brake adjuster so that it is closed. Attach the parking brake to the shoe lever.
5. Insert the new brake pads and put the caliper back on the mounting bracket. Tighten the bolts with the socket and ratchet.8. Install the adjuster meeting between the brake shoes. Attach the upper link spring to assign tension on the go back spring. Install the upper give back spring with the pliers. Place the brake drum back on the trundle and tighten the hub fan with the wrench. Moderate the wheels on the automobile and tighten the lug nuts with the lug wrench. Lift the motorcar on one side with the vehivle jack so you can pull the jack stand absent from under the Aveo. Lower the van to the ground. Stand the other side of the car and pull that jack stand from under it. Lower the car to the ground.
Front Disc Brakes
6. Place the wheel chocks behind the rear tires. Raise the Chevy Aveo up with the automobile jack. Place a jack stand under the car near the jacking point and raise it to the frame. Lower the jack so that the Chevy is resting on the jack stand. Raise the other side of the car with the automobile jack. Place a jack stand under the car near the jacking point and raise it to the frame. Lower the jack enough that the car is now resting on the jack stands.
7. Remove the lug nuts from the wheels with the lug wrench and pull the wheels off the Chevy. Loosen the brake caliper with a socket and ratchet and pull it from the mounting bracket. Remove the brake pads by pulling them out of the caliper. Push the caliper piston back into the housing. Install the contemporary trailing shoe and push the retaining spring and washer on while twisting it 1/4-turn until it locks into country. Hook the lower transmit spring to the trailing shoe with the pliers. Install the fashionable valuable brake shoe and secure it with the retaining spring and washer. Push in on the washer with the pliers while twisting it 1/4-turn until it locks into deposit.
Put the wheels back on the Aveo and tighten the lug nuts with the lug wrench. Raise the car high enough with the automobile jack so that you are able to pull the jack stand out on that side. Lower the Chevy to the ground and then raise the other side high enough to pull that jack stand out. Lower the car to the ground.
9. Pump the brakes several times, after installing the new brake shoes and pads, until the pedal feels firm. This will seat the shoes and pads against the drums and rotors. Exposed the engine compartment. Siphon two-thirds of the brake fluid from the adept cylinder into a remove pan. Elevate the rear of the Aveo with an machine jack.
