Provided you must remove the stereo from your Ford vehicle, the exact funds can vary. There are two basic methods: mounting bolts or internal clips. Accumulate in apperception, you might very keep to deal with security codes. If you reinstall the decrepit stereo or alter it with a current one, you'll want those codes to receive it to grind.
Instructions
1. Unbarred the hood. You may also need to remove a plastic support bracket from the back of the unit, which can require a wrench or screwdriver (it can vary).
Remove the centre trim bezel from the instrument panel whether one blocks abundant access to the stereo. Encompass a trim stick underneath the trim to disengage its clips. On some models, you must remove side panels antecedent to receive to the centre bezel.
3. Contemplate the outer edges of the stereo unit to behold how it is mounted in lay. If it doesn't visibly contain mounting bolts, look for two small holes along each side edge; this indicates internal clips that require special tools. Remove the mounting bolts with a wrench if they exist.
4. Insert a pair of U-shaped tools into the holes in the sides of the stereo--one tool on each side. Audio specialists and auto supply stores have these special tools. Press the tools as far into the holes as you can, then pull them back out to remove the stereo from the dashboard.
5. Pull the car stereo unit out squarely to avoid getting it jammed. Disconnect all connectors in the back of the unit by hand; the connectors should include the power supply, antenna lead and speaker cables. Disconnect the opposite (murky) cable from the automobile battery. Depending on the exact mannequin, the battery may manipulate cables that simply snap off the terminals or need you to loosen clamps with a wrench. Establish the cable aside so it can't come into contact with the terminal.2.
