Trucks used by off-road enthusiasts can benediction from a heavy-duty transmission such as the 4R100 due to its upgrade options and continuation requirements. Before you install a 4R100 transmission in an off-road vehicle it may wish a rebuild. Rebuilding the transmission requires the replacing or refurbishing of any worn away parts inside the unit.You can undertake the deadweight of rebuilding a 4R100 transmission whether you are eager.
Instructions
Pull the bell housing and Driving-wheel rods elsewhere of the casing.2. Set the rear pinon gears that are positioned on the lower reduce of the three driver's seat arms. These are the lower domination arm, the upper force arm and the gear shift.1. Asset the mounting bolts that are along the elsewhere of the transmission. Remove these bolts by using the socket wrench.
3. Attach a cutting edge rear gear from the rebuild utensils into the slot on Everyone polity arm. Tighten the establish screws that are fix in the Centre of Everyone Driving-wheel with the Allen wrench.
4. Pull outside the spindle shafts from the transmission. These are the two long shafts that appear to extend all the way through the transmission. Grind down any nicks on the shafts with an angle grinder.
5. Replace the housing bushing with a new part, if necessary. Place the spindle shafts back into the 4R100 transmission.
6. Remove the old gasket from the bell housing and replace the gasket with a new part. Re-attach the bell housing to the casing and tighten the mounting bolts.
