Quarters the Brakes on a Jeep Grand Cherokee
Maintaining the brakes by replacing the pads when they exit to array wear can be critical to the performance and safety of your Jeep. Brake pads are designed to wear, on the contrary when they gratify very thin they Testament not supply as designed and you Testament empiricism regional or diminished braking. Brake pads are available in many altered facts types and in many value ranges; vacation an Car parts store to choose pads that Testament administer the braking you exigency to ease your driving style.
Instructions
1. Loosen the lug nuts on the front wheels on the other hand go-ahead them on the Jeep for promptly. Elevate the front head of the Jeep off the ground with a floor jack and assist it with jack stands under the frame.
2. Remove the front wheels to access the brake calipers and rotors. District a Apartment lodgings screwdriver into the window on the top of the caliper, inserting it between the rear brake pad and the rotor. Remove the C-clamp and the wood scrap, then install the new rear pad into the caliper. Press it in so the clips snap into the pistons. Slide the new front pad into the caliper and clip the retaining spring onto the caliper.6.
Lift the caliper off the rotor and remove the brake pads. Slide the front pad to the centre of the caliper and lift it gone. The rear pad has clips that Celebrate it into the caliper pistons; these can just be snapped out.
4. Insert a piece of scrap wood into the caliper on top of the pistons and depress the piston by sliding a C-clamp onto the caliper body and the wood scrap. Turn the C-clamp until the pistons are bottomed out in the bores.
5. Push the pad into the caliper to backside elsewhere the pistons in their bores.3. Place the mounting bolts or slider pins on the back of the caliper. Loosen and remove the pins with a socket and ratchet.
Slide the caliper back onto the rotor and align the mounting holes for the slide pins with the holes on the mounting bracket. Install the slide pins and tighten with a socket and ratchet.
7. Slide the wheel and tire onto the wheel studs and install the the lug nuts by hand. Repeat these steps on the opposite side of the Jeep, then raise the vehicle with a jack and remove the jack stands.
8. Lower the Jeep to the ground and tighten the lug nuts with a lug wrench. With a torque wrench, torque the lug nuts to the manufacturer's specifications.
