The exhaust step on a motorcycle is one of the most noticable aspects of a bike. Motorcyclists can exchange how their bike looks and sounds by changing the exhaust pipes. One behaviour to customize your motorcycle is To erect your own exhaust pipes.
Instructions
Get Started
1. Mark the measurements on your exhaust pipe for each bend you plan to make.
Bending the Pipe
8.Secure the template to the motorcycle for a evaluation fit. This Testament grant you to study how your sketch will look on the motorcycle.
4. Modify the template as desired before proceeding.
5. Measure the length from the engine block to the first bend in your template.
6. Mark the measurement onto your exhaust pipe.
7. Repeat process as needed by measuring from the edge of one bend to the beginning of the next bend. Devise a drawing template for your exhaust pipes and Issue. You can haul the delineation on a sturdy quantity of cardboard or template board. Assemble persuaded your template is the actual extent you thirst your exhaust pipes.2. Chop away the replica from the template.3.
Place the pipe into a pipe or tube bender at the point of your first mark.
9. Bend the pipe to match template. Make small adjustments to the pipe as needed.
10. Repeat the process for each additional bend.
