Moisten pumps are mounted to the front of the engine in most vehicles.
With the aid of the machine fan, the saturate pump of the 1994 Honda Coincide draws bathe from the radiator and passes it to the engine. This action helps the engine control an worthy temperature. Over period, the gasket, which acts as a seal on the imbue pump, may deteriorate. This Testament generate the engine to overheat, or coolant to spill elsewhere and puddle unbefitting the automobile. Fixt the question fly elsewhere to prevent permanent damage to the engine.
Instructions
1.5. Spray the gasket of the new water pump with silicone sealer. Position the new pump against the engine block until it is properly positioned.
3. Loosen and remove the bolts that secure the doctor pump to the engine, starting at the centre. Carefully remove the radiator hose from the water pump and let on the words to filter into a drip pan. Encompass a rag into the opening of the engine block. Remove the old water pump.
4. Clean residue from the pump housing.
Void all fluids from the cooling transaction.2. Access the flood pump by removing the fan shroud, fan, belts and shaft spacers. Secure the water pump with the bolts using a torque wrench.
6. Check the pump rotation to ensure that it moves freely.
7. Place the fan, fan shroud and belts back into place. Reconnect the radiator hose that you disconnected during the removal of the old water pump.
8. Add coolant to the vehicle until it reaches the fill line on the coolant canister in the car's engine.
