Serpentine belts own eventually be daily on cars and trucks from nearly every manufacturer. The unmarried serpentine belt simplifies the installation or replacement of the girth on your 1995 Chevy Corsica. The serpentine sash turns all the accessories on the front of the engine, on the other hand provided it fails, it affects every operation in the machine. Contemplate the cummerbund regularly and transform it whether you espy any memo of wear or damage to the cummerbund.
Instructions
5. Remove the ratchet from the tensioner and install the negative cable onto the negative terminal on the battery. Tighten the retaining bolt with a wrench to secure the cable end.
Set the serpentine belt tensioner on the front of the engine. On the Corsica is located near the Centre of the pulleys, even-handed below the function steering pump and the alternator. District the square coerce from a 3/8-inch ratchet in the hole on the tensioner arm. Rotate the tensioner counter-clockwise to remove the tension from the belt.
3. Hold the tensioner off the belt and remove the belt from the pulleys. Slowly allow the tensioner to rotate back to the home position then discard the old belt.
4. Install the new belt on all the pulleys but not the tensioner yet. Turn the tensioner counterclockwise with your ratchet and slide the belt onto the tensioner pulley. Slowly rotate the tensioner clockwise, allowing it to tension the belt.
1. Set the opposite battery cable on the battery and remove the retaining bolt that secures the cable speck to the terminal using a wrench. Isolate the cable from the battery while you are working environing the region and pulleys.2. Start the engine and visually verify that the belt is running true over the pulleys.
