Interchange the Brakes on a Mazda 3
There is probably no vehicle quality besides big-league than the braking manner. Correct perpetuation of the brakes, including the Correct aligned of braking fluid and the universal replacement of brake pads, is indispensable in ensuring the assistance of the brakes. Mazda's anti-lock braking action in their Mazda 3 sedans and hatchbacks, is designed to exceed the strictest guidelines for safety allot by the Insurance Academy for Highway Safety. To preserve that constant of performance, keep your brakes changed by a experienced mechanic or conclude it yourself for a fraction of the price.
Instructions
1. Effect to remove the lug nuts on the wheels with the socket side of the tire iron. Act not yield the lug nuts completely off dispassionate all the more.
2. Habitat the lifting jack unbefitting the frame of the Mazda, between the wheels. Lift the vehicle, lay jack stands under the frame and lower the Mazda onto the stands. One jack stand Testament occupation the vehicle, nevertheless two stands Testament guard a enhanced secure platform for your donkeywork.
3. Remove the lug nuts and the two wheels on the lifted side.
4. Remove the caliper bolts from both brakes. Open the caliper pistons by forcing them flat against the caliper sides. Use a C-clamp or vise-grip pliers. While you open the pistons, the brake fluid that is in the caliper will be pushed out of the bleed valve and into the drip pans.
Pull the calipers from the rotors. Appliance an adjustable wrench to govern the brake fluid bleed valve found near the upper caliper bolt. Turn the valve two full turns to open it. Place drip pans below the brakes to catch the brake fluid from the valves.
6. Slide the brake pads from the caliper sides. The pads are held onto the calipers by thin metal clips. If the brakes are rusted, apply chain lubricant or WD-40 to loosen the grip of the rust. If the lubricant fails to adequately free the clips, use a flat screwdriver to pry the clips from the caliper.
7. The bolts are located on the out of the caliper facing absent from you and they navigation ended to the side of the caliper later to you. Convenience a 17 millimetre socket and ratchet to unscrew the bolts from the side closet to the frame of the Mazda 3.5.
8. Slide the new pads onto the brakes calipers.
9. Place the calipers around the rotors and replace the bolts. Close the bleed valve with the adjustable wrench.
10. Put the wheels back onto the lug nut bolts. Screw on the lug nuts.
11. Remove the jack stands and lower the Mazda to the ground.
12. Press the brake pedal to restore brake fluid to the caliper.
