Sagging headliners are not solitary appealing, on the contrary they can be hazardous.
As many cars lifetime, the headliner info on the ceiling of the passenger compartment Testament actualize to sag. Sometimes the bearings becomes so evil that the information Testament rip and fall and could halt the Chauffeur's outline, fitting a safety hazard. Much provided it may not bend to this stop, it can be an irritation when the windows are manage and the headliner is flapping in the breeze. This puzzle can be constant with a dwarf size of cash and some day to cause the business.
Depending on the motorcar, the rearview mirror may extremely need to be removed. Double check that nothing else is holding the headliner board in place.4. Remove the headliner board from the car.
Remove the dome glassy from the ceiling of the machine by gently squeezing and removing the plastic cover over the bright bulb. There should be many screws that can be removed, allowing for the aglow fixture to dangle by its wires. The wires can be removed by disconnecting them from the wires time to come outside of the ceiling. Normally, they are connected with snap connectors, which can easily be disconnected.
2. Remove the trim all the hook encompassing the headliner. Some of the trim, such as that by the pillars, may enjoy screws that require to be removed. Most of the trim can be pryed off with a flathead screwdriver. Bethink that the intent is to remove the headliner board that is held in accommodation by the trim pieces, so the trim may not corner to be completely removed, nevertheless exclusive lowered so the headliner board can be removed.
3. Remove the seatbelt hardware by prying off the plastic include with a flathead screwdriver. Remove the bolts using a 3/16-inch sparkplug wrench. Very remove the visors and clothes hangers using the torx screwdriver.
Instructions
Repair a Sagging Auto Headliner
1.This may be a little tricky and may require two people, one to hold any trim out of the way and one to wrestle the board out of the car. The old fabric on the headliner board should come off fairly easily. Sand the headliner board thouroughly to remove any old glue and divots. Apply the adhesive to the headliner board according to the instructions that came with the repair kit, and apply the new fabric. Smooth any wrinkles out of the fabric with something flat.
5. Allow the headliner to dry in a warm place for a few hours, depending on the instructions for the type of adhesive that came in the repair kit. Reinstall the headliner board carefully so as not to snag it on anything and cause a rip. Refasten the trim and any hardware that may have been removed in order to take out the headliner board. Reconnect the dome light. If done properly, the headliner should be tight against the board with no sags or wrinkles.
