The steel cable on a four wheeler's winch is connected to a turn shove inside the winch by a devotee persist of the cable.2. Pull the winch cable all the Exit until you gaze the turn wheel. The nut securing the cable to the turn wheel will be on the right or left side of the turn wheel in clear view at the end of the cable.3.
Instructions
1. Turn the force to the winch off. Flip the gear Proceeds Press-stud on the face of the winch to Proceeds the turn circle.
Transform the cable as soon as any damage is visible or whether the cable breaks. You can get the replacement cable from the winch manufacturer. When you get the replacement cable be persuaded to receive one particular to your winch; there should be a serial character on the winch that Testament broadcast the manufacturer which cable to sell you.
Remove the nut from the end of the cable using the ratchet set. Pull the cable from the turn wheel and set it aside.
4. Insert the metal stem on the end of the new cable into the hole that the old cable was in. Tighten the nut as much as possible using the ratchet and socket.
5. Turn the power on and place the winch in reverse. Allow the winch to pull the new cable around the turn wheel, making sure that the cable does not overlap itself.
