Repairing damaged rear Car glass yourself is significantly cheaper than having the replacement done commercially. Most persons modify auto glass when it is cracked or showing signs of wear such as scratches. Normally a van owner hires a known to install the auto glass to establish that it has a snug, weatherproof fit. But, new advances in window blueprint and installation mode own helped generate it a do-it-yourself project. Whether you accept basic Car repair training you can perform this installation licence.
Instructions
1. Remove any wires that are connected to your rear window defroster. This can take 12 to Day and night. Clean excess sealant from the glass and replace the window trim.
Lift the old window out of its groove. Remove all of the remaining urethane sealant from the groove using a razor blade.
3. Use a caulk gun to apply a thin line of urethane sealant around the inside edge of the window opening. Apply a thin line of sealant around the edges of the new window.
4. Set the new window into the groove within the window opening.
5. Allow the window to set and the urethane to harden. Remove the window trim and weatherstrip seal. Avail a razor blade to remove all of the ancient adhesive and urethane around the window.2.
