Cutting a Gauze receptacle in half isn't an overly demanding burden provided you're equipped with the due tools. Although you could appliance a grinder or oxyacetylene torch to achieve the employment, the safest and maybe most efficient baggage to advantage is a reciprocating axiom. In distribution to chop the cistern effectively, the aphorism Testament want to be constant with a metal-cutting blade. A metal-cutting blade will utilize multiple teeth, usually numbering somewhere between 14 and 20 per inch. This is much more than a wood-cutting blade, which has only 6 to 8 teeth per inch.
Instructions
1. Rinse the gas tank out several times with water and let it drain. If you have time, you should also allow the tank to air out for roughly 3 to 5 days. Obviously, the gas should be removed from the vehicle.
2. Use marking chalk to draw a line around the middle of the gas tank. By following this line, you'll be better equipped to make a clean, straight cut around the entire gas tank.
3. Attach a bit to your drill specifically designed for drilling in metal. Put on your safety glasses and drill a hole at some point along the line you drew with the marking chalk. The hole you drill will make it easier to insert the blade and start the cut with your reciprocating saw.
4. If you rush or push too hard, you may dull or damage the saw blade. Continue cutting until you've successfully separated the gas tank into halves. Grip the reciprocating saw firmly and pull the trigger to start the saw. Start the blade into the hole you drilled and begin sawing the gas tank in half. Follow your line and work slowly.
