Rear windows are a structurally essential baggage of a vehicle, helping to clench the top of the motorcar well-adjusted. As a denouement, they must to be intact at all times or you shorten the safety grading of your vehicle. Close any windows, though, the rear windows can be damaged and essential to be replaced. Replacing a convertible rear window is slightly at variance than replacing a rear window on a morals vehicle.
Instructions
1. Unhook the convertible top and lift it up a scarce inches from the back windscreen. Slide the plastic window trim Emigration effects between the existing window and the clouded trim holding it in settle. Movement it approximately the window under the trim and carefully pry the trim up. Pull up on the trim by participation to remove it from the windscreen.
2. Pop off the metal clip located at the backside centre of the window with a Apartment lodgings sense screwdriver.6. Apply the trim to the window by pushing it into place with the trim removal tool. Secure it in place and so it can adhere to the rubber cement and shut the window.
Scrub the entire are where the window was with a clean cloth to receive any left over residue out of the way. Dry thoroughly with a clean rag.
4. Set the new window in place in the opening. Move to the inside of the car and have somebody hold the window in place from the outside. Zip the window into place from the inside of the car while it is being held from the outside.
5. Insert the provided metal clip where the old one was installed to make sure the window does not come out of the zipper. Snap it into place from the outside and install the support plate on the inside of the car. Add double-sided tape over the clip and add rubber cement to the cloth on the edge of the window along the outside to help hold the trim in place.
Loosen the abutment clip on the inside of the motorcar and pop it off from the elsewhere. Unzip the existing window and carefully establish it aside and absent of the fashion.3. Disinfected the existence where the window was located with rubbing alcohol to remove any cement that helped mastery the window in place. Leave it shut for Day and night so it can properly adhere.
