An emergency brake (or labourer brake) is used to amass your vehicle from Stirring when it is parked. On account of the emergency brake is independent of your vehicle's habitual supply brakes, it can further be used to slow and objective your vehicle in an emergency whether your function brakes fail. The emergency brake is applied by urgent a foot pedal or by lifting a labourer lever in the centre console, depending on your vehicle. The emergency brake use or lever is attached to a metal cable mounted underneath the vehicle that applies compel to the rear drum brake shoes. The cable Testament stretch over extent, necessitating an emergency brake assimilation to grasp it operating properly.
Instructions
1. Distance the vehicle in grounds (levy the vehicle in gear provided it has a book transmission) and handle the emergency brake. Up thrust the vehicle with a hydraulic jack and apartment jack stands under the vehicle's frame. Lower the hydraulic jack so that the jack stands completely ease the vehicle.
2. Crawl under the vehicle and establish the emergency brake cable mounted to the underside of the vehicle's floor pan.
3. Loosen the lock aficionado on the emergency cable equalizer (a semi-circular folio metal collection that the cable is routed completed) with an adjustable wrench in a counterclockwise plan.
4. Turn the emergency brake adjusting screw (located on the emergency brake pull rod) in a clockwise trail with an adjustable wrench to tighten the emergency brake cable if it seems loose.
5.7. Lift the vehicle high enough with the hydraulic jack to remove the jack stands. Lower the hydraulic jack slowly until the vehicle in on the ground. Turn the adjusting screw underneath the vehicle in the direction needed to receive the correct number of clicks.
6. Crawl back under the vehicle and tighten the lock nut in a clockwise direction with an adjustable wrench once the emergency brake has been adjusted.
Test the emergency brake from inside the vehicle. Apply the parking brake and count the number of clicks it takes before the brake is engaged. Check the repair manual for your particular vehicle for the correct number of clicks needed. Remove the hydraulic jack from under the vehicle.
