Gluing the rear composition mirror Press-stud can arrange the contrariety between attention the mirror up during your commute and having the mirror fall during the guide. The rear view mirror Press-stud is an adhesive that connects the windscreen to the actual mirror. The front of the Press-stud has a sticky adhesive while the back of the Press-stud needs some glue. Gluing your rear view mirror can build your Journey a unharmed one.
Hold the button on the surface for 10 minutes or until it has completely stuck. Attach the entire mirror to complete the setup of the rear view mirror.
The thin stage of experienced glue Testament come off easily.
2. Soften the back of the Press-stud by rubbing it against sandpaper. Appropriateness 100 or 150 grit sandpaper, owing to it can polish the back and not damage the Press-stud.
3. Use two to three sprays of glass cleaner onto the windscreen to start cleaning the mirror. Three sprays will be enough To cleanse the whole mirror.
4. Wipe the mirror off with a dry wash cloth or paper towel. Let the mirror air dry, once you have dried the mirror. This will ensure that the mirror is completely dry. Applying glue to a wet mirror will cause the mirror to fall.
5. Apply two to three small drops of mirror adhesive glue onto the back of the button. Place the button in the middle of the windshield. The curved part of the button should face up.
6.
