Nitrofitz Parts
Slow representation air box interpretation does blank nevertheless inhibit the flow of arctic, burdensome air into your engine's intake, reducing performance and fuel economy. The easiest means to receive augmented horsepower and additional miles per gallon from fuel-injected cars and trucks is by adding a just out air intake to the throttle object of your engine.
Instructions
1. Arena the vehicle in a well-lit nature and lift the hood. Disconnect the bloodshot, absolute battery cable and tie it back with a thin tie strap to prevent the cable from forthcoming in contact with the battery during the installation.
2. Use the retaining bracket of the old air tube to secure the new air intake tubing in place. The new intake can be secured using a tie strap or by having a mounting bracket secured to the tubing to secure it in place.6. Loosen any retaining fasteners that connect the factory tubing to a mounting bracket and remove the tube from the engine compartment.
3. Open the factory air box and remove the filter element inside. Locate the housing brackets and remove the retaining bolts to extract the entire air box from its mounting bracket. Consider removing any guards and engine shields that surround the air box before attempting to remove the assembly. Some late-model vehicles require portions of the grille to be removed to get at all the air box fasteners.
4. Clean around the throttle body outlet where the flexible elbow will be connected to the intake manifold. The new air intake is made up of a thin-walled mandrel bent aluminum tube fastened to the throttle body using a rubber elbow and two hose clamps to make the connection to the new tubing.
5. Align the tubing so that is follows the factory intake tubing path towards the space where the factory air box was located. Disconnect the plant air intake meeting from the intake manifold throttle body. Use a screwdriver to release the fastener, or loosen a clamp with pliers. Move to the factory air box and release the intake tubing from the air box before you pull the tubing free from the throttle body.
Use a hose clamp to secure a high-flow cone air filter to the end of the new air intake tube. Reconnect the red, positive cable to the vehicle's battery.
