Cause definite the advanced brake pads are the exactly ones for your Passat mannequin.
Replacing the worn pads on your vehicle is a quite straightforward employment. All the more, failing to properly install one Element may foundation the brakes to convert noisy or still direction to brake problems. Paying control to point Testament avail you precipitation up the daily grind and cause it equitable the beginning era. And this includes comparing the broken down pads with the brand-new ones to constitute confident they are the correct fit for your specific Passat model.
Remove all the brake lining dust from the brake assembly using brake parts cleaner and a lint-free towel.13. Push the caliper piston back into its bore using a brake piston reset tool.14.
Park your Passat on a level surface and siphon half the brake fluid from the plastic reservoir of the brake master cylinder with a turkey baster and a plastic bottle. Store the bottle with the fluid in a safe place for later recycling.
2. Shift the transmission into Neutral.
3. Loosen the lug nuts on the front wheels using a lug wrench.
4.23. Pump the brakes five times or until the pedal feels firm then road-test your vehicle to make sure the brakes are working properly.
You can use the opposite side as a visual reference to reassemble every part in its correct place.
6. Unplug the brake pad wear indicator if your particular Passat model is so equipped.
7. Pry off the brake pad retaining spring from the caliper housing side facing you with a flat head screwdriver.
8. Unscrew and remove the two caliper mounting bolts using a ratchet and a Torx bit.
9. Lift the brake caliper off the caliper bracket and secure it to the coil spring with heavy wire to prevent stretching the brake hose connected to the caliper.
10. Pull the inner brake pad off the brake caliper piston using a flat head screwdriver.
11. Remove the outer brake pad from the caliper bracket by hand.
Installing the New Brake Pads
12.
Instructions
Removing the Old Brake Pads
1.Install the new inner pad by pushing its back spring into the caliper piston. If the back spring on the brake pad has an arrow, make sure the arrow will be pointing in the brake rotor's direction of rotation when moving forward.
15. Place the new outer brake pad onto the caliper bracket.
16. Install the brake caliper onto the caliper bracket and start the two caliper mounting bolts by hand.
17.Tighten the caliper mounting bolts to 18 foot-pounds (25 Nm) using a torque wrench and the Torx bit.
18. Replace the brake pad retaining spring onto the caliper housing using the flat head screwdriver.
19. Plug in the brake pad wear indicator if your particular Passat model is so equipped.
20. Remount both front tires onto the wheel hubs and reinstall the lug nuts. Tighten the lug nuts snugly using the lug wrench.
21. Lower the front wheels and tighten down the lug nuts.
22. Refill the master cylinder reservoir with new brake fluid, if necessary, to bring the level up to the "MAX" mark then replace the cap.
Jack up both front wheels using a floor jack, support the vehicle on jack stands and chock the rear wheels.5. Dismount both front tires from the wheel hubs and work on one side at a time.
