Thursday, March 26, 2015

Identify A C6 Transmission

The C-6 transmission is a heavy-duty three-speed automatic transmission manufactured by Ford Engine Firm. The bolts are located all over the adequate lip of the pan. Counting the digit of bolts is decisive, as the pan for the C4 transmission uses a complete of by oneself 11 bolts.2. Being the C6 is and durable than the C4, it is normally the bounteous expensive of the two, and can be harder to set. For, alive determinate the C6 is decisive.


Instructions


1. Count the quantity of bolts which occupancy the transmission's oil pan to the transmission. The oil pan is located on the backside of the transmission, and uses a complete of 17 bolts to clutch the pan to the transmission. The C6 was nearly particularly used for aerial performance vehicles and trucks. The C6 is regularly mistakenly identified as a C4 transmission, very manufactured by Ford. Not alone accomplish both transmissions own a much the same appearance, they are both three-speed units.


Allot the filter plug. Whereas the C4's void plug is located on the backside of the transmission's pan, the drain plug on the C6 is on the side of the pan, and can be located on the Chauffeur's side of the transmission.


3. End if the transmission's call housing can be indifferent from the transfer case. Unlike the C4 transmission, which features a bell housing that can be separated from the transfer case, the C6 is a one-piece unit, meaning that the bell housing cannot be removed from the transmission. The bell housing in located on the front of the transmission. The torque converter sits inside the bell housing. If a seam exists between the bell housing and the center of the transmission, the transmission is not a C6.


4. Locate the speedometer driver gear. The speedometer driver gear on the C6 is located on driver's side of the extension housing. The extension housing is the rear portion of the transmission where the driveshaft enters the back of the transmission.


5. Locate the control levers. The control levers connect to the shifter inside the vehicle, and change the transmission's gears when the shifter is moved. There are two control levers on the C6. Both control levers are located on driver's side of the transmission, just above the transmission's pan.