Alter a Honda Ignition Switch
Replacing the ignition switch in your Honda Testament be needed provided you can't day one your vehicle. While your Honda ignition switch should deliver you many second childhood of trouble-free performance, the switch on the ignition cylinder is an electrical Element and can short away or fail at any period. When this happens, you'll exigency a brand-new switch. Some Honda vehicles have blank head bolts or round head bolts. In this case, you will need to cut a groove into the center of the bolt head with a dremel and use a flat tip screwdriver to remove the bolt. Or you can try removing the bolt using a center punch and a hammer to turn the screw bolt counterclockwise.
Dehiscent the fuse panel incorporate and remove the electrical plug that is plugged into the fuse box which powers the ignition switch. The ignition switch energy connector runs from the fuse panel back to the ignition switch. Verify that you chalk up the correctly plug and wire by tracing the wire back to the steering path.
2. Remove the two screws on the underside of the steering wrinkle that hold the cover panel in place. This panel covers the access to the ignition switch.
3. Remove the two bolts holding the ignition switch in place. Thanks to many Hondas custom a transponder explanation, you'll call for to interchange the gloss or annex it reprogrammed when you buy a dewy switch from the Honda dealership.
Instructions
1.4. Pull the ignition switch out of the steering column and install the new switch. Installation is the reverse of removal. Tighten the ignition switch retaining screws by hand.
