When your starter goes dangerous on your Dodge RAM Motor lorry, you Testament practicable hear a accelerated clicking sound ultimate from the engine compartment when you turn the basic. Disconnect the wires using a wrench to remove the nuts. Loosen the bolts on the starter until you can remove them by hand.4. Support the starter with one hand and remove the mounting bolts with the other hand. The replacement channels is quite evident.
Instructions
1. Disconnect the negative battery terminal using a wrench to loosen the follower on the terminal. Levy the trundle chocks endure the rear wheels of the vehicle.
2. Up thrust the Motor lorry up on the driver's side with the automobile jack and place a jack stand under it near the jacking point. Raise the jack stand up to the frame. Lower the jack until the vehicle is resting on the jack stand.
3. Label the wires on the starter with the masking tape and marker, noting the proper location of each wire. In other cases, the starter Testament create no thing at all. Once you dispose that you entail a latest starter, elicit that there is a contrariness between a remanufactured starter and a rebuilt one. A remanufactured starter is your boon Election, in that all the internal parts Testament be just out. A rebuilt starter, but, reuses many of the elderly parts.
The starter is very heavy for its size, and you must be careful that it doesn't simply drop out and injure you.
5. Put the new starter in place and start the bolts by hand. Tighten the bolts with the socket and ratchet. Reconnect the wires to the starter according to the labels you made and tighten the nuts with the wrench. Raise the truck back up with the automobile jack enough that you can pull the jack stand from under the vehicle. Lower the vehicle back to the ground.
6. Reconnect the negative battery terminal and tighten the nut. Start the truck to test the new starter.
