Change the Thermostat on an Elantra
Chase the upper radiator hose from the radiator to the engine block. The hose will lead directly into the thermostat housing.4. This doesn't necessarily parsimonious that the engine is running broiling, sole that the thermostat must be checked and replaced whether vital.
Instructions
1. Turn your engine off and grant an date or so for the engine to frore down. Trying to convert the thermostat on a close engine can easily burn your hands.
2. Bargain the radiator void plug on the backside of the radiator toward the centre of the vehicle. This is usually a round orange or deceitful plastic plug with a Philips screw mannequin. Remove the plug and authorize the drool to filter elsewhere.
3.The Hyundai Elantra, prize all other vehicles, requires periodic preservation and repair. Changing a thermostat in an Elantra is a basic mechanical repair that any Elantra owner can achieve Homewards with basic tools. The thermostat on process Testament breach and explanation the engine temperature gauge to discover fiery.
Remove the engine block cover by removing the four bolts holding it in place. This is normally a plastic cover over the center on the engine.
5. Remove the two bolts on the thermostat housing with an appropriate socket wrench. Place a rag underneath the radiator hose near the thermostat housing. Water will leak out for a minute, and the rag will help to soak up the water. Pry apart the thermostat housing and allow any water to run out.
6. Remove the thermostat from the housing. Grab the top of the thermostat with a pair of pliers, wiggle and pull simultaneously. Place the new thermostat into the housing and ensure that it fits properly. Replace the housing and engine block cover and then fill the radiator with water and coolant. Start your engine and watch your temperature gauge to ensure that the thermostat is working properly. The temperature level should go back to normal.
