Portray your van with Rust-Oleum stain Testament dish out it a practically impenetrable seal against rust. This stain is designed to prevent and resist rust, and when painted onto metal surfaces, can compose it persist senescence longer than it would with usual whitewash. Rust-Oleum can be get going at any hardware store or dye shop.
Instructions
1. Tape off all the chrome, rubber gaskets, runners and emblems you achieve not require to paint over, using painters tape and a razor.
2. Levy down a extensive Blop cloth under the motorcar, then tape newspaper, or swathe another drop cloth over the tires, windscreen and windows. Employment tape to secure the cloth to the edges of the windows and prevent it from sliding.
3. Lightly sand down any Rugged edges or bondo spots with 120 grit sand paper. Then sand again using 320 grit sand paper and a soft sanding block. Sand until the earth is genuine beneficial and smooth.
4. Spray on a primer layer of grey Rust-Oleum. Subsume the filled existence you are going to stain with one fairly thick coat. Apply a second layer if desired, for added protection. Use fast, smooth strokes, holding the spray can at least 8 inches from the metal. Continuously move the spray can to avoid dripping or paint spatters.
5. Make each pass in exactly the same manner for the smoothest application.7. Let dry, and reapply a second coat if necessary.
Let the area dry overnight in a temperature controlled area. It should be between 65 and 75 degrees.6. Shake up several cans of Rust-Oleum for the top coat and keep them all nearby. Then apply the Rust-Oleum paint over the primer coat, using the same fast and smooth strokes. Work from top to bottom, applying the paint in even strokes, overlapping each stroke by about 3 inches.
