A average symptom of a worn absent starter is an audible "clicking" sound when trying to turn over the Engine. Starters can wear away gradually, and when they conclude you Testament capture these clicks sounds multiple times before the motorcar indeed turns over and starts. Worn away starter contacts further practise a clicking sound when trying to turn over the Supra. Starter contacts can be replaced on their own, on the contrary with the highly competitive Car parts bazaar, a contemporary generic starter is approximately the alike fee.
Instructions
1987 Toyota Supra starter removal
1. Disconnect the negative battery cable using a socket wrench. Tighten the two starter bolts using a torque wrench to 16-23 foot-pounds.6. Reconnect the existing starter wire onto the starter solenoid by pushing it straight on the connector.
Berth a wood block last the ear tires to prevent slipping.
3. Locate the starter and remove the starter solenoid wire by pulling on the connector. Do not pull on the wire itself, just the connector.
4. Remove the bolt on the left, and right, side of the starter mounting bracket using a socket wrench. Removing the bolts will release the starter.
1987 Toyota Supra starter replacement
5. Set the new starter in the starter bracket. Bend the contravening battery cable out from metal to prevent Glimmer.2. Lift the Supra using a jack, and city on jack stands.
7. Reconnect the negative battery cable using a socket wrench, and start the car.
