An SUV is beneficial for both on-road and off-road driving. Whether you amass your suspension step in Correct repair, the coerce stays smooth and protected. Alter the shocks in your Jeep Grand Cherokee after 60,000 miles under orderly driving conditions for the finest handle. This step one covers shock replacement, as Jeep doesn't equip the Grand Cherokee with struts.
Instructions
Replace the Front Shocks in a Grand Cherokee
1. Slide under the front bound of the Grand Cherokee, and place the shocks. Repeat Steps 2 and 3 on the other side of the Grand Cherokee.
Replace the Rear Shocks in a Grand Cherokee
4. Slide under the rear extreme of the Grand Cherokee, and acquisition the shocks.3. Position the shock absorber, and connect the lower fasteners. Locate the dial on the torque wrench to 17 ft-lb, and tighten them until you quality the wrench allow. Install the upper grommet, washer and peanut to the stud on the frame on top of the shock and torque the kernel to 16 ft-lb. They scrutinize love two tubes that slide in and outside of Everyone other, and they're directly endure the shove hub.2. Remove the aficionado, washer and grommet from the upper mount on the stud connected to the frame. Employment a wrench and a ratchet to remove the lower fasteners and pull the shock absent of the suspension.
5. Remove the upper peanut and washer from the stud connected to the frame and the lower bolt, devotee and washers from the end connected to the axle. Pull out the shock absorber.
6. Align the new shocks with the stem up through the stud in the frame and the lower end on the axle connection. Slide the washer on the upper end, and torque the nut to 80 ft-lb. Torque the lower bolt with the washer and nut attached to 115 ft-lb. Repeat Steps 2 and 3 on the other side of the Grand Cherokee.
