The easiest hang-up to remove an O2 sensor from your vehicle's exhaust manifold is down the handle of a specially designed O2 sensor socket. Provided you conclude not acquire access to an oxygen sensor socket, you can all the more perform the course. It Testament even-handed be a minor bounteous dense without the factor.
Instructions
1. Unplug the oxygen sensor's wires from your vehicle's electrical harness, then discard the old sensor.5. Install the new oxygen sensor into the setting in the exhaust manifold and use your wrench to tighten it down. Plug the new sensor's wires back into the electrical harness, then lower the car off of the jack stands.
Follow the exhaust pipe at the back of your vehicle forward towards the engine. The oxygen sensors will be located immediately before and after the catalytic converter, which is the large metallic box on your exhaust manifold. The oxygen sensors are large gold-colored plugs with a series of wires running from the tip.
3. Use your wrench to turn the oxygen sensor counterclockwise. This will loosen the sensor enough for you to remove it.
4. Elevate your vehicle off the ground with your jack, then deposit it down onto the jack stands. This Testament let on you to animation underneath the vehicle and set the O2 sensor.2.
