The Pontiac Sunfire shares most of its components with the Chevrolet Cavalier, which makes the mode of removing door panels bare analogous between the two vehicles. Lift the panel over and away from the door handle.7. Use the door trim/window crank tool to disengage the door panel clips. Insert the tool between the door panel and the door skin; push the tool outward to pop out the clips.
Disconnect the cynical battery cable with the pliers, provided the Sunfire is equipped with power windows, locks or mirrors. Whether it's not equipped with ability Accoutrement, this is chance thanks to you Testament not be handling wiring components.
2. Remove the screw from the limited panel in the upper corner of the door panel (interior side of the side-view mirror). Pull off the panel. Provided the Sunfire is equipped with energy mirrors, practice an Allen wrench to remove the hex screw that attaches the effectiveness connexion to the panel.
3. Remove the three screws along the backside of the door panel and then remove the unmarried screw on the side of the door panel.
4. Remove the two screws from underneath the door panel armrest.
5. Remove the album window crank, whether the Sunfire is equipped with textbook ("roll up") windows. Encompass the door trim/window Eccentric person item between the panel and the Eccentric person. Push the thing forward to Proceeds the metal clip, and then pull the grip straight off. Provided the Sunfire is equipped with capacity windows, you keep cipher to remove. The switch panel is located remain the gear lever on the centre console.
6. Pry off the plastic panel that surrounds the door operate. Insert the door trim/window crank tool behind the panel to pry it off. Most Sunfire models are not equipped with power windows, locks or mirrors; but, safety precautions must be taken when removing the door panel from models that are, over of the electrical components. Expect the manner of removing a door panel in your Sunfire to catch enclosing 20 minutes.
Instructions
1.There are eight clips around the perimeter of the door panel (but none on top).
8. Pull the door panel out and then push it up to remove it from the door. Reach behind the panel and depress the tab on the power lock switch to disconnect it, if the Sunfire is equipped with power door locks. The panel can now be completely removed.
