The coolant tank of your vehicle acts as both a recovery vehicle for coolant that overflows from the radiator and, in some cases, as a fill environment for the step. Bolt the replacement coolant tank to the vehicle using the 3/8-inch ratchet and socket and reconnect the hoses to the tank using the pliers or the flathead screwdriver, depending on what kind of hose clamp your vehicle has.4. Fill the coolant tank to the "Fill" level mark on the side of the tank using the 50-50 pre-dilluted coolant.
Pop the hood and unbolt the coolant cistern from under the hood. When it's loose, pull it forward and clout it in district with your participation.
2. Cause the pliers to clamp sincere the GM hose clamp that secures the hoses to the container. Provided your hoses bear been replaced before, you may necessitate to adoption a flathead screwdriver instead, on account of most dudes replace the GM clamps with traditional hose clamps. Keep a bucket underneath the hose when it's disconnected to keep the coolant from spilling onto the ground.
3. Provided a crack appears in the cistern, you'll include to exchange it before coolant is gone astray and the vehicle begins to overheat. Replacing the coolant vehicle in an Astro car is a quite straightforward development and can be done in a meagre minutes.
Instructions
1.Alternatively, you can fill the tank with 50-percent traditional coolant and 50-percent distilled water, but the 50-50 mix is more convenient and, in most cases, cheaper.
